Absenicon3.0 C138 User Manual
(1) Turn on the Bluetooth switch to automatically scan for devices;
(2) Select the device to be paired;
(3) According to the pop-up "Bluetooth Pairing Request", enter the corresponding number and click "Pair".
10.2 Effect settings
In the setting interface, select "Picture" to enter the "Effect Settings" interface.
10.2.1 Mode selection
"Standard Mode", "Soft Mode", "Movie Mode" and "Conference Mode" can be selected respectively;
It can be individually set from brightness, saturation, contrast, color temperature, and hue.
To Next Page
Loading...
Need help?
General
