5.2.3. LAN set-up / Adding a camera that is already set-up
To set up a camera on a LAN network, use the network cable to connect the camera to your home
network (router) before connecting the camera to the power.
Open the app and select option 2 to set up the camera on your LAN network.
Enter a name for your camera.
Use the 'Search' button to search for the camera on the network or enter the camera's DID manually.
You now need to enter the camera's standard security code, '123456'. If the camera has already been
set up, enter the security code previously assigned to the camera.
Press the 'Save' button to add the camera.
Note
If the camera has been added with the standard security code, '123456', this has to be
changed to the camera's live cast the first time it is accessed.
Note
If the camera has already been set up via another smartphone or user, select this method
to add cameras that are already set up.
6. App2Cam Plus: Compatibility
The App2Cam Plus is compatible with the following devices:
PPIC32020 / PPIC32520 / PPIC34520
PPIC35520
TVAC19000A-B / TVAC19100A-B
Note
Please note that some of the functions explained or demonstrated in these instructions
may not be compatible with older generation cameras, or the camera functions may be
different due to differences in the hardware.
To Next Page
Loading...
Need help?
General
