11.2. Video settings
Video quality: Standard quality / better quality / best quality
You can change the camera's preset video quality to VGA, HD
or Full HD here. The value set here has no effect on the
recording, which is always made in Full HD.
Environment mode: Outdoor / Indoor 50 Hz / Indoor 60 Hz
Change the environment mode here to adjust the camera to the
light conditions.
For use indoors, adjust the frequency (50 Hz or 60 Hz) in line
with the frequency on the mains network used.
In European countries, the frequency is 50 Hz.
Image improvement: Levels 1–5
You can change the light enhancement here. A higher level will
lighten the image more, a lower level less.
Display orientation: Normal / Tilt / Reverse / Flip & Reverse
Change the camera's display orientation here.
Time stamp: Change the position of the time stamp by dragging and
dropping the time stamp into the desired corner.
Change the colour of the time stamp by clicking on the
desired colour.
Remove the time stamp by clicking the image once.
Changes will only take effect if saved. The 'Reload' button
refreshes the preview.
11.3. Component settings (PPIC35520 only)
Component list: Adding / delete / editing components.
Programmed components display.
To Next Page
Loading...
Need help?
General
