11.10. Device settings
Camera name: You can change the camera's name here.
This is used on the time stamp and notifications.
Time zone: You can adjust the time zone of the camera here.
Summer time: You can enable or disable summer time.
If summer time is enabled, the time is put forward by one
full hour.
Profile settings: You can save the camera's profile settings on your end device.
You can then load the settings on to other cameras, or re-load
them following a reset.
Device information: Information about the current firmware version / MCU version /
storage capacity and free storage space on the SD card.
Update firmware: If there is new firmware available for your camera, this
additional menu item will appear in the advanced settings.
To Next Page
Loading...
Need help?
General
