EasyManua.ls Logo

Abus TVIP52501 - 20 Disposal; 21 Technical Data

Abus TVIP52501
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
110
English
21.Technical data
Model number TVIP52501
Camera type Network camera
Image Sensor 1/2.7" CMOS Progressive Scan Sensor
Resolution 176 x 144 1920x1080 (intermediate levels can be freely selected)
Pixels (total) 1920x1080
Pixels (effective) 1920x1080
Lens CS mount for lens, DC connector
Digital zoom 4 x
Day/night switch-over Mechanically removing IR cut filter
Image compression H.264, MPEG-4, MJPEG
Frame rate H.264 1920x1080@25FPS
MPEG-4 1920x1080@25FPS
MJPEG 1920x1080@25FPS
Video out Yes ,PAL or NTSC
Number of parallel streams 4
Number of maximum users 10
Minimum lighting (color) 0,8 Lux
Electronic shutter 1/5 - 1/40.000 seconds
Motion detection 3 zones
Pre-alarm/post-alarm memory Yes
Image overlay Date, camera name, private zones
Alarm inputs (NO/NC) 1
Digital output 1 (12VDC@400mA)
Audio Audio output (Speaker Out), audio input, 2-way audio
Backlight compensation Yes
Microphone Integrated
White balance Yes
Alert message E-mail / FTP / HTTP notification / relay output / NAS drive / SD card
Supported browsers Mozilla Firefox or Internet Explorer 6.x and higher
Software supported eytron VMS, ONVIF support
SD card max. 32 GB (SD/SD-HC)
RS-485 port Yes
PTZ protocols Pelco D, Pelco P, LiLin, Samsung scc643, DynaDome /
SmartDome
Network connection RJ45 Ethernet 10/100 Base-T with PoE
Network protocols IPv4, IPv6, TCP/IP, HTTP, UPnP, RTSP/RTP/RTCP, IGMP, SMTP,
FTP, DHCP, NTP, DNS, CoS, QoS, SNMP, 802.1X
Encryption HTTPS SSLv3
Access protection IP address filter, user name, password, 3 authorisation levels
Power supply 12 VDC, 24 VAC, 802.3af PoE
Current consumption Max. 5.0 Watt
Operating temperature 0 °C ~ 40 °C
Dimensions (W x H x D) 76 x 60 x 162 mm
Certification CE, RoHS, C-Tick
22.URL Commands
For some customers who already have their own web site or web control application, the video
server/Network camera can be easily integrated through URL syntax. This section specifies the external
HTTP-based application programming interface. Please refer to Appendix for complete URL command list.

Related product manuals