6
Ensure your power source conforms to the electrical requirements of this product.
Check your local code restrictions for additional safety measures that may be needed for a proper
code compliant installation.
Read all instructions before installing and using this product.
If you are unfamiliar or have doubts about performing this product’s installation, seek the services of a
qualified, trained, and licensed professional. Inappropriate installation will void this product’s warranty.
Do not attempt to hardwire this product. Performing any retrofitting actions may result in personal
injury and/or electrical damage, and will void this product's warranty.
This product must not be used in potentially hazardous locations such as flammable, explosive,
chemical-laden, or wet atmospheres.
Ducted products must always be vented to outdoor areas.
Do not cover power cords with rugs or other fabric materials.
This product pairs with those that has rotating parts. Safety precautions should be exercised during
the installation, operation, and maintenance of this product.
Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust openings as it may
cause electric shock, fire, or damage to this product. Do not block or tamper with this product in any
manner while it is in operation.
Do not depend on the on/off programming as the sole means of shutting power from this product.
Unplug the power cord before installing, servicing, or moving this product.
Do not operate this product while its cord is damaged, or if it malfunctions, has been dropped, or is
damaged in any manner.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
PRODUCT WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,
OBSERVE THE FOLLOWING:
To Next Page
Loading...
Need help?
General
