Accent 800 Hardware Manual Page 41
Updating the NuVoice Software
Recommendation: Install NuVoice updates as soon as they are available.
Updating via the Internet
To perform this type of update, your device must be connected to a Wi-Fi network.
1. Plug in the battery charger.
2. Select the Tools key.
3. Select the Toolbox.
4. Select Maint Menu.
5. Select Software Update Menu.
6. Select Internet Update and follow the on-screen prompts.
Updating via USB Flash Drive
1. Insert your USB flash drive into the computer to which you will download the software update.
2. Go to https://www.prentrom.com/support/accent.
3. Under “Featured Downloads” select Download: USB Flashdrive Software Update.
4. Under “Accent USB Flashdrive Software Update”, click Download.
5. At the “Do you want to open or save” prompt, click the arrow to the right of “Save”, select Save As,
and save the file to your computer’s desktop.
6. Turn on your device and plug in the battery charger.
7. Copy the downloaded file from your computer’s desktop to your USB flash drive.
8. Remove the USB flash drive from your computer and insert it into your device.
9. On the device, go to the Toolbox and select Maint Menu.
10. Select Software Update Menu, select USB Update, and follow the on-screen prompts.
11. When the update process is finished, remove the USB flash drive from your device.
Note: Once your device is running the updated software, you can unplug the battery charger.
To Next Page
Loading...
