Access Virus Rack - Page 139

ACCESS VIRUS RACK 137
Edit Section/Menu
ture an infinitely variable control range –
ergo, you have more than 100 modula-
tion destinations at your disposal.
If you haven’t selected a source for one
of the ASSIGN options (SOURCE = OFF),
the subordinate parameters will not be
displayed.
In addition to the three ASSIGN options,
the user interface features – as discussed
earlier – a freely definable modulation
destination for LFO 1 and 2 called
ASSIGN.
ASSIGN 1 SOURCE Selects the modula-
tion source for the first modulation
assignment.
01111111111111111112
1 ASSIGN 1
Source ChanPres≤
61111111111111111154
ASSIGN 1 DESTINATION Selects the mod-
ulation destination for the first modula-
tion assignment.
01111111111111111112
1 ASSIGN 1
Dest Panorama≤
61111111111111111154
Controls the intensity of the first modu-
lation allocation.
01111111111111111112
1 ASSIGN 1
Amount +10≤
61111111111111111154
ASSIGN 2 SOURCE Selects the modula-
tion source for the second modulation
assignment.
ASSIGN 2 DESTINATION 1 Selects the
first modulation destination for the sec-
ond modulation assignment.
ASSIGN 2 AMOUNT 1 Controls the inten-
sity of the second modulation assign-
ment for the first modulation
destination.
ASSIGN 2 DESTINATION 2 Selects the sec-
ond modulation destination for the sec-
ond modulation assignment.
ASSIGN 2 AMOUNT 2 Controls the inten-
sity of the second modulation assign-
ment for the second modulation
destination.