ACCESS VIRUS RACK 193
Volume Control
VOLUME CONTROL
Next to the Oscillator Volume parameter,
the Virus features four other volume
stages for every SINGLE or PART:
Patch Volume
Volume level of the sound program. Use
Patch Volume to balance out the funda-
mental differences in levels between the
different sound programs. The Patch Vol-
ume is stored along with the sound pro-
gram. The unit value is 100.
Part Volume
Volume level of the MULTI-PART. Use
Part Volume to balance out the different
levels within a MULTI program. Part Vol-
ume is stored along with the MULTI pro-
gram. The unit value is zero since Part
Volume is a bipolar, relative parameter.
Channel Volume
and ExpressionThese two performance
controllers (Ctr. #7 and #11) can be used
in order to make temporary changes in
signal level via a sequencer or volume
pedal. Like all performance controllers,
these are not stored with the sound pro-
gram. The unit value is 127. A double-
click on the POWER and STORE buttons
together (Panic function) resets Channel
Volume and Expression to this unit value.
To Next Page
Loading...
