Access Virus Rack - Velocity

138 CHAPTER 16
The Parameters
ASSIGN 3 SOURCE Selects the modula-
tion source for the third modulation
assignment.
ASSIGN 3 DESTINATION 1 Selects the
first modulation destination for the third
modulation assignment.
ASSIGN 3 AMOUNT 1 Controls the inten-
sity of the third modulation assignment
for the first modulation destination.
ASSIGN 3 DESTINATION 2 Selects the sec-
ond modulation destination for the third
modulation assignment.
ASSIGN 3 AMOUNT 2 Controls the inten-
sity of the third modulation assignment
for the second modulation destination.
ASSIGN 3 DESTINATION 3 Selects the
third modulation destination for the
third modulation assignment.
ASSIGN 3 AMOUNT 3 Controls the inten-
sity of the third modulation assignment
for the third modulation destination.
 Velocity
. In addition to the following fixed
destinations, any parameter can be con-
trolled via velocity by way of the Modu-
lation Matrix (ASSIGN).
VELOCITY OSC 1 SHAPE Determines the
intensity of the VELOCITY control for the
first oscillator’s SHAPE parameter (see
appropriate section).
01111111111111111112
1 VELOCITY
Osc1Shape +4≤
61111111111111111154
VELOCITY OSC 2 SHAPE Determines the
intensity of the VELOCITY control for the
second oscillator’s SHAPE parameter (see
appropriate section).
01111111111111111112
1 VELOCITY
Osc2Shape -10≤
61111111111111111154