76 CHAPTER 10
The Effects Section
THE EFFECT SECTION
For every SINGLE program and every
PART, you can access two stereo effects
individually. You’ll find these effects –
analog boost and chorus – in the aptly
named EFFECTS menu.
The vocoder and the delay/reverb sec-
tion are each available just once, but you
can address them individually via the
PARTs’ Effect Send parameter. In the sig-
nal path, all effects are connected in
series in accordance with their sequence
in the Effects menu.
Each SINGLE program contains its own
settings for the delay/reverb section. In
MULTI mode, the sound programs
involved share the same delay/reverb
section. For this reason, the parameter
values are determined by the settings of
the currently active MULTI program (also
see [“EFX Section” on page 115]).
To Next Page
Loading...
