Access Virus Rack - Page 149

ACCESS VIRUS RACK 147
Arpg&Ctrl Section (menu)
program may be. Comparable to a small
MIDI fader box, this mode is used to con-
trol connected MIDI devices. Note that
this information is not processed inter-
nally in the Virus.
The setting for the actual DEFINABLE
mode is global. Under normal circum-
stances, you should set DEFINABLE mode
to ”Single” because this is the most ver-
satile mode. When you select a SINGLE
sound whose DEFINABLE mode is set to
”Single”, this setting is of course
enabled. If not, Global DEFINABLE mode
is enabled.
01111111111111111112
1 DEFINABLES
Mode Single≤
61111111111111111154
DEFINABLE 1 SINGLE This is where you
enter the parameter assignment for the
DEFINABLE 1 knob. The entry is an ele-
ment of the current SINGLE PROGRAM
and is stored along with it. The entry is
only active when DEFINABLE 1 MODE is
set to SINGLE. When DEFINABLE 1 SIN-
GLE is set to OFF, the Display page set-
ting DEFINABLE 1 GLOBAL is activated.
01111111111111111112
1 DEF 1 SINGLE
DelayTime (ms)≤
61111111111111111154
[XP] DEFINABLE 1 GLOBAL This is where
you enter the parameter assignment for
the DEFINABLE 1 knob. The entry
remains valid regardless of the currently
selected SINGLE PROGRAM. The entry is
only active when DEFINABLE 1 MODE is
set to GLOBAL or SINGLE; although in
the latter case DEFINABLE 1 SINGLE in
the current SINGLE PROGRAM must be
set to OFF before the entry is activated.
01111111111111111112
1 DEF 1 GLOBAL
ClockTempo≤
61111111111111111154
[XP] DEFINABLE 1 MIDI This is where you
enter the MIDI Controller assignment for
the DEFINABLE 1 knob. The Controller is
routed via MIDI Out for the purpose of
controlling a connected MIDI device. The
entry is only active when DEFINABLE 1
MODE is set to MIDI.
01111111111111111112
1 DEF1 MIDI
Mode ModWheel≤
61111111111111111154
[XP] DEFINABLE 2 MODE Same as DEFIN-
ABLE 1; see paragraph above.
DEFINABLE 2 SINGLE Same as DEFINABLE
1; see paragraph above.