11
Your New System
1
Button Functions
Here are the functions of the power/set and arrow buttons on the meter. These functions are used
throughout this booklet. For more information on using these buttons during meter setup, see Chapter 5,
Meter Memory, Setup, and Data Transfer.
Button Function Action
(power/set
button)
Turn the meter on or o.
Press and release
.
Enter the set-up mode.
Turn the meter on. Press and hold until set-up appears
on the display.
Set the chosen feature.
Press and release .
Exit the set-up mode at any
time.
Press and hold until the flashing test strip symbol
appears on the display.
Check the display segments. Check the display before each test to make sure all
segments are clear and look like the picture to the left.
Turn the meter o. Press and hold
to see the complete
display.
If one of the segments is missing or looks dierent from the
picture, do not use the meter. Contact the ACCU-CHEK
Customer Care Service Center at 1-800-858-8072.
(right arrow
and left
arrow
buttons)
Adjust settings for time and
date, beeper, test reminders,
and hypoglycemic alert.
Press and release
or .
Press and hold or to scroll faster.
Enter memory. Press and release or .
Mark a blood glucose result. Press and release or .
51801_07021933001.indb 11 5/7/14 8:52 AM
To Next Page
Loading...
Need help?
General
