Accu-Chek Aviva User Manual

6. Trigger the lancing device while keeping
steady pressure on the site. Apply
pressure to the site with the lancing
device to assist the flow of blood.
7. Touch the blood drop to the front edge of
the yellow window of the test strip. When
you see flash, you have enough blood in
the test strip. If you applied blood but do not
see the flashing , you may reapply more
blood within five seconds. Flag the result or
remove and discard the used test strip.
Note: If the blood drop is too small, reapply pressure to get a sufficient blood drop.
23

Accu-Chek Aviva Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Coding	No coding required
Battery Life	Approximately 1000 tests
Memory	500 test results
Battery Type	1 x 3V lithium (CR2032)
Operating Humidity	10% to 90% RH
Meter Weight	59 g
Measuring Range	10 mg/dL to 600 mg/dL
Automatic Shut Off	After 90 seconds of inactivity