35
TIME / DATE
(hrs, min, am/pm,
month, day, year)
BEEPER
(on/off)
ALARM CLOCK
(A-1, A-2, A-3, A-4)
HYPO ALARM
(off, on, level)
You are here
Setting the Beeper On/Off
Your new meter has the beeper pre-set to “On.” You can set the beeper to “OFF,” if you
prefer—this will not affect your test results.
The beeper is helpful because it prompts you:
• To apply blood or control solution to the test strip
• When enough blood or control solution is drawn into the test strip
• When the test is complete
• When a button is pressed
• When it is time to test (if you set the alarm clock)
• If an error occurred while testing (even if the beeper is set to off, it still beeps for an error)
To Next Page
Loading...
