Accu-Chek Aviva User Manual

36
1. Press to turn the meter
on. The flashing test strip
symbol appears.
2. Enter the set-up mode
(press and hold for
about four seconds).
“Set-up” and the hour
flash on the display.
3. Press and release
repeatedly until you
reach the display with the
flashing beeper symbol
and “On” or “OFF.”
Setting the Beeper On/Off (continued)

Accu-Chek Aviva Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Coding	No coding required
Battery Life	Approximately 1000 tests
Memory	500 test results
Battery Type	1 x 3V lithium (CR2032)
Operating Humidity	10% to 90% RH
Meter Weight	59 g
Measuring Range	10 mg/dL to 600 mg/dL
Automatic Shut Off	After 90 seconds of inactivity