Accu-Chek Aviva User Manual

39
When you are setting the time for the alarm clock function, the bell symbol remains on
the display and “set-up” flashes continuously.
1. Press to turn the
meter on. The flashing test
strip symbol appears.
2. Enter the set-up mode
(press and hold for
about four seconds).
“Set-up” and the hour
flash on the display.
3. Press and release
repeatedly until you reach
the display with the bell
symbol, “OFF,” and the
flashing “set-up” and
“A-1.”

Accu-Chek Aviva Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Coding	No coding required
Battery Life	Approximately 1000 tests
Memory	500 test results
Battery Type	1 x 3V lithium (CR2032)
Operating Humidity	10% to 90% RH
Meter Weight	59 g
Measuring Range	10 mg/dL to 600 mg/dL
Automatic Shut Off	After 90 seconds of inactivity