46
6. Put the meter on a flat surface. Point the two
IR windows toward each other. They should be
3 to 10 cm apart.
7. Do not move the infrared cable (computer),
PDA, or meter during the transfer.
8. Follow the prompts on the software.
9. The software program may shut off the
meter automatically when the data transfer
is complete.
Notes:
• If the data did not transfer successfully, try again. If you still have problems, call
Accu-Chek Customer Care at 1-800-363-7949.
• To make the most of the download feature, you must set the time and date in the
meter correctly.
Downloading Your Results to a Computer or PDA (continued)
To Next Page
Loading...
