36
3.6 Procedure for programming your basal rate profile
Make sure that your Pump is in STOP mode and the infusion set is NOT
connected to your body.
1.
Press d to move to the BASAL RATE
PROGRAMMING 1 (2, 3, 4 or 5 accordingly)
screen.
Press d to move to the first hour.
This is always 00:00 – 01:00 (12 AM – 01 AM if the
American time format is used).
2.
Press f to select.
The daily BASAL RATE TOTAL is displayed.
Press a or s or scroll to set the hourly basal
rate given by your doctor or healthcare team.
4.
3.
To Next Page
Loading...
