39
Getting Started
The month field flashes.
The day field flashes.
38
10. Press the MEM button
to select the correct
minutes.
11. Press the SET button.
12. Press the MEM button
to select the correct
month.
13. Press the SET button.
Setting the Beeper, Year,
Time, and Date
At this point, the AM or
PM designation will appear.
This occurs if in the 12-
hour format; the day field will
flash if in the 24-hour format.
This occurs if in the 12-
hour format; the month field
will flash if in the 24-hour
format.