Backlight
The backlight helps you to see the display in poorly lighted areas. You can turn
on the backlight from the RUN screen, from the STOP screen, or when you are
browsing the menus. Press the
a key to turn on the backlight. The backlight
turns itself on when an alert or an error message appears. The backlight turns
itself off after 30 seconds if no keys are pressed.
Hint:
Start programming with the a key in areas of poor lighting as this will
also turn on the backlight.
Note:
To make the display easier to read, you can flip the display orientation
by 180° and adjust the display contrast lighter or darker. See the sections
“Display Orientation” (page 120) and “Display Contrast” (page 135) for
more information.
▲
!
If you discover incomplete characters, numbers, or symbols
on the display, put your insulin pump into STOP mode and
perform a system check by simply removing the battery for a
few seconds. When you reinsert the battery the system check
will occur. If the incomplete characters, numbers, or symbols
remain, your insulin pump may need to be returned since you
may not receive the correct information for operating your
pump. Put your insulin pump into STOP mode and contact
Pump Support at 1-800-688-4578 immediately.
Chapter 1: Understanding Your New System ACCU-CHEK Spirit Insulin Pump10
CAUTION
To Next Page
Loading...
Need help?
General
