Accu-Chek insulin pump User Manual

5. Press f to select. The priming amount of 25 units of insulin is shown on
the display.
6. When START PRIMING is displayed, press and hold f until you hear a
melody and the piston rod moves forward.
The priming process begins and a count-up is
shown on the display. Your pump stops priming
after 25 units.
When the priming process is finished, your pump
returns to
STOP.
The infusion tubing set is properly primed when
there are no air bubbles visible in the tubing and a drop of insulin has come
out of the connector or cannula.
Stopping the Priming Process
You can stop the priming process at any time by
pressing any key. Your pump displays the STOP
PRIMING screen.
Chapter 2: Getting Started ACCU-CHEK Spirit Insulin Pump
55

Accu-Chek insulin pump Specifications

General

Brand	Accu-Chek
Model	insulin pump
Category	Medical Equipment
Language	English