Accuphase C-2810 - Maintenance and Repair Procedures; Wood Case Crack Prevention

Accuphase Laboratory Inc.
Issued 2006-8-1
MODEL : C-2810
SUBJECT : The measure against a crack of the front of a wood-case
項 目 : ｳｯﾄﾞｹｰｽの前面のｷｽﾞ対策
No.
C-2810-002
TOP VIEW (上面)
Details ; The contact crack by the structure of the back of front panel
and the front of a wood case is prevented. A protection sticker
is stuck and prevented into the back portion(Convex portion) of
a panel.
詳 細 ; ﾌﾛﾝﾄﾊﾟﾈﾙ裏面とｳｯﾄﾞｹｰｽの前面の接触構造による接触キズの防止｡
ﾊﾟﾈﾙの裏面ｹﾞﾀ部分に保護ｽﾃｨｯｶを貼り防止します。
Preparation Parts /準備部品
Sticker 180-9243-04 4pse.
ｽﾃｯｶ
From a panel end, 1mm width
is taken and a sticker is
stuck on 4 places.
ﾊﾟﾈﾙ端より1mm間隔を開けて
4ヶ所にｽﾃｨｯｶを貼ります。
The back portion(Convex portion)
of the front panel ; 4-corner
ﾌﾛﾝﾄﾊﾟﾈﾙ裏面の突起(ｹﾞﾀ)部分4ヶ所
1mm width
1mm間隔
Protection Sticker
保護ｽﾃｨｯｶ
(180-9243-04)
1mm width
1mm間隔
6mm
11mm
An applicable serial number as follows, F6Y001 to F6Y100
該当 ｼﾘｱﾙ番号は F6Y001～ F6Y100
Service Information
Caution / 注意
1mm width is certainly
taken and stuck.
必ず1㎜幅を空けて貼ります
1mm width
1mm間隔
1mm width
1mm間隔
－１８－