ACE095 Page 16 of 17 Rev Date: 12.7.2021
10. External Power Cable
Location: The inlet to the power cable is located on the power supply. If connected, the power
supply would be located there.
Type and number of fastenings: None, direct pressure connection method.
Tools required: None.
Procedure: Disconnect the external power cable from the main desktop assembly with a firm
pull at the base of the connection method.
Selective Treatment/Special Handling Per Annex VII, Directive 2012/19/EU: Any external
electrical cables > 25mm must be removed separately and shall be disposed or recovered in
compliance with Directive 2008/98/EC.
To Next Page
Loading...