Key Component Upgrades
Chapter 3 Peripherals and Options 55
Installing Memory
Follow these steps to install memory:
1. Turn off the computer, unplug the AC adapter (if
connected) and remove the battery pack. Then turn the
computer over to access its base.
2. Remove the screws from the memory door; then lift up
and remove the memory door.
3. Insert the memory module diagonally into the slot, then
gently press down until it clicks into place.
16 MB 64 MB 80 MB
32 MB 0 MB 32 MB
32 MB 16 MB 48 MB
32 MB 32 MB 64 MB
32 MB 64 MB 96 MB
64 MB 0 MB 64 MB
64 MB 16 MB 80 MB
64 MB 32 MB 96 MB
64 MB 64 MB 128 MB
Slot 1 Slot 2 Total Memory
500-e.book : 500-3e.fm Page 55 Monday, August 17, 1998 9:36 PM
To Next Page
Loading...
