Machine Maintenance Procedures 3-19
3. Remove four (4) screws (D) from HDD bracket (E) (Figure 3-15).
4. Remove HDD bracket (E) from HDD module.
5. Remove HDD connector (C) from HDD module.
Figure 3-15. HDD Module
HDD Module Installation 0
1. Attach HDD connector (C) to HDD module. Refer to Figure 3-15.
2. Put HDD brackets (E) onto HDD module (Figure 3-15).
3. Install and secure four (4) screws (D) to HDD brackets (E) (Figure 3-15).
4. Put HDD module onto Base Assembly and connect HDD module to mainboard
connector (B). Refer to Figure 3-14.
5. Install USB Module.
ID Size Quantity Screw Type
D M3.0* Ni 4
To Next Page
Loading...
