Machine Maintenance Procedures 3-37
3.
Continue along the sides of the bezel until all the latches have been released
(Figure 3-34).
Figure 3-34. LCD Bezel
4. Lift the bezel from LCD module.
LCD Bezel Installation 0
1. Put LCD bezel on the LCD module. Refer to Figure 3-32.
2. Press along the edges of the LCD bezel to secure the latches on the LCD module.
Refer to Figure 3-34.
3. Install and secure two (2) screws (A) to the LCD bezel. Refer to Figure 3-32.
4. Install LCD module.
ID Size Quantity Screw Type
A M2.5*5.0 2
To Next Page
Loading...
