Machine Maintenance Procedures 3-35
DC-in Jack Installation 0
1. Connect DC-in Jack (C) to DC-in bracket (D). Refer to Figure 3-31.
2. Put DC-in Jack Module (A) on the top assembly. Refer to Figure 3-30
3. Install and secure one (1) screw (B) to the top assembly (Figure 3-30).
4. Put DC-in cable into the cable guides on the top assembly (Figure 3-30).
5. Install LCD Module.
ID Size Quantity Screw Type
B M2-0.4*2.0 Ni 1
To Next Page
Loading...
