Acer Aspire 4250 - ODD Module Procedures

3-14 Machine Maintenance Procedures
ODD (Optical Disk Drive) Module Removal 0
Prerequisite:
Base Assembly Removal
1. Remove ODD module from ODD bay (Figure 3-9).
Figure 3-9. ODD Module in Lower Cover
2. Remove two (2) screws (C) from ODD module (Figure 3-10).
3. Remove ODD bracket (D) from ODD module.
4. Remove ODD bezel (E) from ODD module.
Figure 3-10. ODD Module
C
C
D
E