3-34 Machine Maintenance Procedures
Speaker Installation 0
1. Put speaker cable (F) into cable guides (Figure 3-30).
2. Put speaker into the upper cover (Figure 3-30).
3. Secure speaker with two (2) captive screws (E) (Figure 3-30).
4. Install speaker bracket (D) onto upper cover. Refer to Figure 3-29.
5. Install and secure four (4) screws to speaker bracket. Refer to Figure 3-29.
6. Connect module FFC (A) to mainboard connector (C). Refer to Figure 3-29.
7. Install mainboard.
ID
Size Quantity Screw Type
C M2.0*2.0 3
E M2.5*4.0 1
To Next Page
Loading...
