5-6 Jumper and Connector Locations
Clear CMOS Jumper 0
Figure 5-3. CMOS Jumper
BIOS Recovery by Crisis Disk 0
BIOS Recovery Boot Block 0
BIOS Recovery Boot Block is a special block of BIOS. It is used to boot up the system with
minimum BIOS initialization. Users can enable this feature to restore the BIOS firmware to a
successful one once the previous BIOS flashing process failed.
BIOS Recovery Hot Key 0
The system provides a function hot key, <Fn+Esc>, for enable BIOS Recovery process when
system is powered on during BIOS POST. To use this function, it is strongly recommended to
have the AC adapter and Battery present. If this function is enabled, the system will force the
BIOS to enter a special BIOS block, called Boot Block.
Table 5-3. CMOS Jumper
Item Description
1 Clear CMOS Jumper
1
To Next Page
Loading...
