Acer ASPIRE 4253 - ODD (Optical Disk Drive) Module Removal

3-12 Machine Maintenance Procedures
ODD (Optical Disk Drive) Module Removal 0
Prerequisite:
Battery Pack Removal
1. Remove one (1) screw (A) from lower cover (Figure 3-7).
Figure 3-7. ODD Module in Lower Cover
2. Remove ODD module (B) from ODD bay (Figure 3-7).
3. Remove two (2) screws (C) from ODD module (Figure 3-8).
4. Remove ODD bracket (D) from ODD module.
5. Remove ODD bezel (E) from ODD module.
Figure 3-8. ODD Module
A
B
D
D
E
E
C
C