Machine Maintenance Procedures 3-13
ODD Module Installation 0
1. Install ODD bezel (E) on ODD module (Figure 3-8).
2. Install ODD bracket (D) on ODD module.
3. Secure two (2) screws (C).
4. Insert ODD module (B) into ODD module bay. Refer to Figure 3-7.
5. Install and secure screw (A) to lower cover.
6. Install battery.
ID Size Quantity Screw Type
A M2.5*6.0 1
C M2.0*3.0 2
To Next Page
Loading...
