3-12 Machine Maintenance
Removing the Back Cover 0
1. Perform the “Removing the Battery Pack” procedure described on page 3-9.
2. Remove the screws securing the back cover.
Figure 3-9. Back Cover Screws
3. Insert a non-marring plastic scribe on the base door’s notch to release the back cover (1),
and then remove the cover from the computer (2).
Figure 3-10. Back Cover
Table 3-9. Screws
Step Screw Quantity Screw Type
Back Cover Disassembly M2.5 × L6 3
To Next Page
Loading...
