Machine Maintenance 3-13
Removing the HDD Module 0
1. Perform the “Removing the Back Cover” procedure described on the preceding section.
2. Remove the HDD screw.
Figure 3-11. HDD Module Screw
3. Grasp the gray tab and use it to disengage the HDD from its connector and then remove
the HDD assembly from its compartment.
Figure 3-12. HDD Module
Table 3-11. Screw
Step Screw Quantity Screw Type
HDD Module Disassembly M2 × L3 1
To Next Page
Loading...
