5-8 Jumper and Connector Locations
Performing a BIOS recovery 0
To perform a BIOS recovery:
1. Shut down the BIOS failed-computer.
2. Connect the USB storage disk containing the Crisis Recovery disk files to the computer.
3. Press and hold the <Fn + Esc> keys, then press the power button.
The BIOS recovery process begins. When the process is complete the computer will
automatically reboot.
4. Disconnect the USB storage disk from the computer.
5. Perform a BIOS flash procedure to update the BIOS firmware. Refer to BIOS Flash
Utilities for detailed instructions.
To Next Page
Loading...
