Machine Maintenance 3-27
4. Remove the twelve (12) screws from the lower cover.
Figure 3-33. Lower Cover Screws
5. Locate the small gaps on the top side of the upper cover and insert a small flat-blade
screwdriver or non-marring scribe into each gap to separate the upper cover from the
lower cover. Once the upper cover is separated, lift it from the lower cover.
Figure 3-34. Upper Cover
Table 3-12. Screws
Step Screw Quantity Screw Type
Upper Cover Disassembly M2.5 x L6 9
M2 x L3 3
To Next Page
Loading...
