What does 'A: Drive Error' mean on an Acer Aspire Z5760 Desktop?
This message on your Acer Desktop means the BIOS attempted to configure the A: drive during POST, but was unable to properly configure the device. This may be due to a bad cable or faulty diskette drive.
What does 'Drive Not Ready' mean on an Acer Aspire Z5760 Desktop?
This error on your Acer Desktop is often reported by drives when no media is present.
What does 'Boot Failure...' mean on an Acer Aspire Z5760?
This is a generic message on your Acer Desktop indicating the BIOS could not boot from a particular device.
What does 'Microcode Error' mean on an Acer Desktop?
This message on your Acer Desktop is most likely to appear when a brand new CPU is installed in a mainboard with an outdated BIOS. In this case, the BIOS must be updated to include the Microcode Update for the new CPU.
What does 'Multi-Bit ECC Error' mean on an Acer Aspire Z5760 Desktop?
A multiple bit corruption of memory has occurred on your Acer Desktop, and the ECC memory algorithm cannot correct it. This may indicate a defective memory module.
How to fix Acer Aspire Z5760 Desktop if it will not power on?
If your Acer Desktop won't power on, first ensure the power cable is securely connected to both the AC power jack on the computer and a working AC power source. Also, verify that the voltage selector switch is set to the correct voltage.
What does 'S.M.A.R.T. Command Failed' mean on an Acer Aspire Z5760?
This message on your Acer Desktop can be reported by an ATAPI device using the S.M.A.R.T. error reporting standard. It means the BIOS tried to send a S.M.A.R.T. message to a hard disk, but the command transaction failed. S.M.A.R.T. failure messages may indicate the need to replace the hard disk.
What does 'S.M.A.R.T. Capable but Command Failed' mean on an Acer Aspire Z5760 Desktop?
This message on your Acer Desktop can be reported by an ATAPI device using the S.M.A.R.T. error reporting standard. It means the BIOS tried to send a S.M.A.R.T. message to a hard disk, but the command transaction failed. S.M.A.R.T. failure messages may indicate the need to replace the hard disk.
What does 'Insert BOOT diskette in A:' mean on an Acer Aspire Z5760?
This message on your Acer Desktop means that the BIOS attempted to boot from the A: drive, but could not find a proper boot diskette.
What does 'Invalid Boot Diskette' mean on an Acer Aspire Z5760 Desktop?
This message on your Acer Desktop means that a diskette was found in the drive, but it is not configured as a bootable diskette.
General| RAM | Up to 8GB DDR3 |
|---|---|
| Display | 23-inch Full HD (1920 x 1080) touchscreen |
| Operating System | Windows 7 Home Premium |
| Processor | Intel Core i3, i5, or i7 |
| Graphics | Intel HD Graphics |
| Chipset | Intel H61 |
| Optical Drive | DVD Super Multi |
| Connectivity | Wi-Fi 802.11b/g/n |
| Ports | USB 2.0, HDMI, Audio |
| Storage | 500 GB or 1 TB HDD |
Detailed technical specifications for processor, chipsets, BIOS, and memory.
Hardware configuration program built into system ROM for setting system options.
Step-by-step guide on how to enter and navigate the BIOS setup utility.
Step-by-step guide to remove the system's mainboard.
Steps to diagnose hardware failures by obtaining details and recreating symptoms.
Detailed steps for inspecting internal components for troubleshooting.
Cross-reference of symptoms to potential FRU replacements.
Interpretation of beep codes indicating system status or errors.
Steps to clear CMOS data and reset BIOS settings to defaults.
Procedure for recovering the system BIOS if it becomes damaged.
Procedures for updating the system BIOS.
Lists of Field Replaceable Units (FRUs) with part names and numbers.
To Next Page