What does 'Secondary Slave Hard Disk Error' mean on an Acer Desktop?
This message on your Acer Desktop is typically displayed when the BIOS is trying to detect and configure IDE/ATAPI devices in POST. It means that the IDE/ATAPI device configured as Secondary Slave could not be properly initialized by the BIOS.
What does 'Secondary Master Hard Disk Error' mean on an Acer Aspire Z5760 Desktop?
This message on your Acer Desktop is typically displayed when the BIOS is trying to detect and configure IDE/ATAPI devices in POST. It means that the IDE/ATAPI device configured as Secondary Master could not be properly initialized by the BIOS.
What does 'Primary Slave Hard Disk Error' mean on an Acer Desktop?
This message on your Acer Desktop is typically displayed when the BIOS is trying to detect and configure IDE/ATAPI devices in POST. It means that the IDE/ATAPI device configured as Primary Slave could not be properly initialized by the BIOS.
What does 'Primary Master Hard Disk Error' mean on an Acer Aspire Z5760?
This message on your Acer Desktop is typically displayed when the BIOS is trying to detect and configure IDE/ATAPI devices in POST. It means that the IDE/ATAPI device configured as Primary Master could not be properly initialized by the BIOS.
What does 'Password check failed' mean on an Acer Aspire Z5760 Desktop?
The 'Password check failed' message on your Acer Desktop means the password you entered doesn't match the password set in the setup. This can occur for both Supervisor and User password verification.
What does 'S.M.A.R.T. Capable and Status BAD' mean on an Acer Aspire Z5760 Desktop?
This message on your Acer Desktop indicates an imminent failure detected by a S.M.A.R.T. capable hard disk. This message can be reported by an ATAPI device using the S.M.A.R.T. error reporting standard and may indicate the need to replace the hard disk.
What does 'S.M.A.R.T. Status BAD, Backup and Replace' mean on an Acer Aspire Z5760 Desktop?
This message on your Acer Desktop indicates an imminent failure detected by a S.M.A.R.T. capable hard disk. This message can be reported by an ATAPI device using the S.M.A.R.T. error reporting standard and may indicate the need to replace the hard disk.
What does 'Reboot and select proper boot device' mean on an Acer Aspire Z5760?
This message on your Acer Desktop indicates that the BIOS couldn't find a bootable device or that the removable media drive doesn't contain any media. Ensure that your boot device is properly selected.
What to do if I see a CMOS Battery Low error on my Acer Aspire Z5760 Desktop?
If you are getting a 'CMOS Battery Low' message on your Acer Desktop, it usually means the CMOS battery needs replacing. It can also appear if the CMOS battery was intentionally discharged.
General| RAM | Up to 8GB DDR3 |
|---|---|
| Display | 23-inch Full HD (1920 x 1080) touchscreen |
| Operating System | Windows 7 Home Premium |
| Processor | Intel Core i3, i5, or i7 |
| Graphics | Intel HD Graphics |
| Chipset | Intel H61 |
| Optical Drive | DVD Super Multi |
| Connectivity | Wi-Fi 802.11b/g/n |
| Ports | USB 2.0, HDMI, Audio |
| Storage | 500 GB or 1 TB HDD |
Detailed technical specifications for processor, chipsets, BIOS, and memory.
Hardware configuration program built into system ROM for setting system options.
Step-by-step guide on how to enter and navigate the BIOS setup utility.
Step-by-step guide to remove the system's mainboard.
Steps to diagnose hardware failures by obtaining details and recreating symptoms.
Detailed steps for inspecting internal components for troubleshooting.
Cross-reference of symptoms to potential FRU replacements.
Interpretation of beep codes indicating system status or errors.
Steps to clear CMOS data and reset BIOS settings to defaults.
Procedure for recovering the system BIOS if it becomes damaged.
Procedures for updating the system BIOS.
Lists of Field Replaceable Units (FRUs) with part names and numbers.
To Next Page