Acer KA270H - Page 10

ACER KA270H
10
S3
Assemble SHD
Lock the Hexagonal screws as picture 1.
Use jig to put the SHD in correct position on Panel. Take off the jig and stick two AL
tapes as picture 2.
PICTURE 1 PICTURE 2
Note: please refer to Appendix for the jig and select “None” for page scaling item.
S4
Assemble LVDS cable
Insert the LVDS cable to the Panel and stick one tape on LVDS cable.
S5
Assemble the lamp wire
Insert the lamp wire to the P/BD .
Stick 2 tape to fasten the lamp wire and one AL-Tape on SHD as the picture.