Acer KA270H - Page 11

ACER KA270H
11
S6
Assemble CTRL-BD
Insert the CTRL BD-FFC to CTRL BD as circle frame, and insert them into the bezel.
Assemble the panel on the bezel and lock 2 trim screws.
Stick Mylar on CTRL BD FFC as square frame and Insert the CTRL BD -FFC to the
PCBA as circle frame.
S7
Assemble RC, stand and base
Assemble the RC with screw.
Assembly the Stand and the Base to Monitor
PICTURE 1 PICTURE 2
NOTE: Circuit boards >10 cm² has been highlighted with the yellow rectangle as above image shows. Please
detach the Circuit boards and follow local regulations for disposal.