Appendix C: Wireless communication
Main configuration of utility
105
Poor Signal : The station starts to search for better AP when signal strength of
currently associated AP is lower than -70dBm °P Default : restores the menus to the
initial values.
Power Save Mode : Power Save mode decreases power consumption. Enabling Power
Save Mode trades off performance for battery life.
Disable - specifies continuous access mode (normal mode)
Enable - enable the power save mode
Automatic- enable a fast power saving mode that provides the best combination of
performance and power usage.
Version Tab
The Version menu provides following information.
Utility Information : The version of the driver, configuration utility, library(Semlib.dll)
Wireless LAN Information : The version of the driver, firmware, EEPROM. The MAC
Address of wireless adapter.
For updated product information, technical support, and downloads, visit the web site
at http://www.acer.com.
To Next Page
Loading...
