Acer n50 - Connecting the Computer

1 Getting started
Preparing to use your Acer n50
9
Connecting the computer
The sync cable that comes with your handheld enables you to synchronise the
information on your handheld with the data in your computer using ActiveSync
technology.
NOTE: If you are using the 3-in-one sync cable (an optional accessory), please do not plug
the USB host into the USB client.
To connect the computer
Connecting the Sync cable
1 Plug the sync cable into the 26-pin I/O connector on the bottom of your handheld.
2 Plug the AC adapter into any AC current outlet.
3 Plug the USB client connector into an available USB port on your computer.
Connecting the Cradle
1 Connect the AC adapter cord to the power socket at the back of the cradle.