1 Getting started
Preparing to use your Acer n50
10
2 Plug the AC adapter into any AC current outlet.
3 Plug the USB client connector into an available USB port on your computer.
Charging your Acer n50
For initial use, you need to charge your handheld for three hours. After that, you can
charge it for a few minutes each day to recharge the battery to full capacity. Normally,
you can use your handheld for 8 straight hours of operation (backlight inactive)
before you need to recharge the battery.
To charge your Acer n50
Insert the battery pack into the battery bay (a), then slide the battery release switch to
the locked position (b)..
To Next Page
Loading...
