- 24 -
Step 7: Place 5pcs of AL-tapes on the four sides of main-shielding to protect EMI
and Add TCO AL
4G.0F913.001 TAPE AL 110*25*0.08T V2400W
2
4G.0E308.001 TAPE AL 150*25*0.08 VW195
1
4G.0LN05.001 TAPE AL 120*45*0.08T P244W
1
4G.0LN06.001 TAPE AL 155*55*0.08T TCO P244W
1
Step8: Take one front-bezel and place the CTRL keypad and LED BD on the bezel
150x25mm 120*45mm
110x25mm 110x25mm
155x55mm
To Next Page
Loading...
