- 25 -
Step9 : Connect the FFC of keypad into the interface board and fix the FFC with AL-
tapes and lock the interface board using hex screw nut.
8F.205B4.019 SCRW MACH STEEL HEX #4-40 NI 4
4G.L0N02.001 TAPE-AL 40*20 L1755 1
Step 10 : Add gasket on the CTRL BD and lock one pc of screw to fix bezel and SHD.
4G.0LN04.001 GASKET 13L*13W*17H P244W
1
8F.WA314.8R0 SCRW TAP CAP M3*1.34P*8L B-NI
1
40x20mm
To Next Page
Loading...
