How to troubleshoot no power on my Acer PD100?
If your Acer Projector displays no power, ensure the power cord and AC power outlet are securely connected. Also, check the lamp cover, interrupt switch, and ensure all connectors are securely connected and not broken. You may also need to check the DC-DC, ballast, and main board.
What to do if my Acer PD100 Projector has no image?
If your Acer Projector shows no image, make sure the signal cable and source are working correctly. If you're using multiple sources, switch between them using the 'Source' button on the control panel. Also, ensure all connectors are securely connected and not broken. If the issue persists, check the main board, DMD board, color wheel, DMD chip, and engine module.
What to do if Acer PD100 Projector has no light on?
If your Acer Projector has no light, ensure all connectors are securely connected and not broken. Also, check the lamp module, DC-DC, ballast, and main board.
What to do if remote control or control panel failed on Acer PD100 Projector?
If your Acer Projector's remote control or control panel has failed, check the battery. If the battery is not the issue, check the remote control itself, the IR receiver, FPC, keypad, and main board.
Why does my Acer Projector auto shut down?
If your Acer Projector shuts down automatically, the issue might be related to the lamp LED, temperature LED, or color wheel. * If it's the lamp LED, check the lamp, lamp driver, and main board. * If it's the temperature LED, check the thermal sensor, thermal switch, and fan. * If it's the color wheel, check the color wheel and photo sensor. Also, consider referring to the 'No Power' troubleshooting steps.
How to fix poor uniformity or shadow on Acer PD100?
If your Acer Projector has a poor uniformity or shadow, ensure the projection screen is free of dirt and the projection lens is clean. If the brightness is less than specified, replace the lamp. You may also need to check the engine module.
Why does my Acer PD100 show a garbage image?
If your Acer Projector shows a garbage image, ensure the signal cable and source are working correctly. Also, check the main board and DMD board.
How to fix color abnormality on Acer Projector?
If your Acer Projector has a color abnormality, try doing a 'Reset' of the OSD menu. You can also try adjusting the color wheel index. If the issue persists, check the main board, DMD board, and color wheel.
How to resolve image flicker on Acer PD100?
If your Acer Projector's image flickers, try doing a 'Reset' of the OSD Menu. Also, ensure the signal cable and source are working correctly. If the problem continues, check the lamp module, color wheel, DMD board, and main board.
Why is my Acer Projector making mechanical noise?
If your Acer Projector is making mechanical noise, check the color wheel and fan module.
To Next Page
General
