Acer PD100 - Usb Driver Upgrade Procedure

Chapter2 10
USB Driver Upgrade Procedure
No Step Procedure Photo
1 Set-up 1. Plug in USB Cable into
the Projector.
2. Hold on "Menu" button
and then plug in Power
Cord.
3. Wait for about 5
seconds.
(Note: The system fan will
not function. The light will
not function as well.)
2 Execute
Program
Execute the C:\Program
files\DLP
Composer\usbupdata.cmd.
(Note: The "DLP
Composer" program
must be closed first.)
3 Type any key to
continue
Type any key to continue.
Then, wait for about 1
minute.