Acer PD100 - Page 19

13 Chapter 2
No Step Procedure Photo
6 1. Choose "Flash Loader"
2. Click "Browse" to search
the firmware file. (PD100
/ PD120)
3. Select the item "Skip
Boot Loader Area (load
all but the first 16KB)."
4. Click "Reset Bus" to
erase the flash memory.
(Note: If the error message
"cannot open USB driver -
No projectors found"
appears, please unplug the
USB Cable and replug,
then re-do 4. Click "Reset
Bus" to erase the flash
memory.)
7 1. If the firmware is ready,
click "Start Download" to
process the firmware
upgrade.
2. Click "Yes" to erase the
flash memory.
Note:
1
4
3
2
1
2