8
Adjusting the OSD settings
Note: The following content is for general reference only. Actual product specifications may
vary.
USB Type-C 5V / below 1.5A: You cannot adjust OSD.
USB Type-C 5V / 1.5A-3A: You can set the brightness value up to 60.
The OSD can be used for adjusting the settings of your LCD Monitor. Press the key to open
the OSD. You can use the OSD to adjust the picture quality, OSD setting and general settings.
Foradvanced settings, please refer to following page:
Notes:
Adjusting the Input select
Picture
Audio
Color
Language
OSD Settings
Setup Menu
:Exit
HDMIC
USB-C
Auto Select
Input Select
Select:
1. Press the key to bring up the OSD.
2. Using the / keys, select Input Select from the OSD. Then navigate to the feature you wish
to adjust.
3. Press the key to confirm your select.
To Next Page
Loading...
